Oxygen Mask Mould-Technical Specifications Of Oxygen Mask

Comments · 11 Views

An oxygen mask is a device that transfers oxygen from a storage tank to the lungs of the human body

An oxygen mask is a device that transfers oxygen from a storage tank to the lungs of the human body. The oxygen mask can wrap the nose and mouth (oral nasal mask) or the entire face (full-face mask). It plays an important role in ensuring human health and protecting the safety of pilots and air passengers.

Oxygen masks are mainly made of plastic, silicone, or rubber.

  1. The interface of the inner hole of the catheter should be unobstructed without blockage
  2.  The mask is equipped with nose clips and elastic bands, and there are exhaust holes on both sides;
  3.  The oxygen supply pipe and the joint should be firmly connected, can withstand 15N static axial pulling force, and should not break or fall off for 15 seconds;
  4.  The oxygen supply catheter should be able to withstand 50kPa air pressure for 15 seconds and should not leak;
  5. The product should be sterile.


Yuhuan Shengjiu Mould Co., Ltd. is a professional China manufacturer and supplier of     Oxygen Mask Mould   and     Syringe Mould   . With people's increasing concern about health, the market demand for medical moulds is growing. With its superb technology, we make these uses of medical mould more. Welcome to consult and order: https://www.medicalmould.net/product/

Comments