Medical Mold - Injection Mold Safety Protection Method

Comments · 55 Views

In order to improve the production quality and dimensional pass rate of the mold, the injection mold needs special care during processing, storage and production. Need to improve the safety of injection molds, Yuhuan Shengjiu Mould Co., Ltd. states:

 

In order to improve the production quality and dimensional pass rate of the mold, the injection mold needs special care during processing, storage and production. Need to improve the safety of injection molds, Yuhuan Shengjiu Mould Co., Ltd. states:

When the mold is closed and the next cycle begins, the plastic parts retained in the mold will be damaged and such damage may further jeopardize the use of the mold. Therefore, it is usually necessary to take measures to ensure that the mold is completely released and the mold part is reset before allowing the mold to close. For a single cavity mold, it is sufficient to use a phototube for detecting whether the injection molded plastic part is dropped. This method cannot be used for multi-cavity molds. In this case, the following methods are employed: a template first reset device, a multi-pulse release device (pulse stripper), an electromechanical mold protection device, an air discharge device, and an ejector plate reset safety device.

Yuhuan Shengjiu Mould Co , Ltd. is a disposable medical device in the mold industry, own medical mold -A leader in a range of equipment for production, design, development, manufacturing, and inspection. Maximizing production efficiency, we are committed to maximizing production capacity compared to a large number of disposable medical components, and our mold production efficiency has reached the world's advanced level. The main production and supply: syringe mold, safety needle mold, oxygen mask mold, needle-free injection tube, expansion mold mold and other   Medical Mould   . For more information visit: https://www.medicalmould.net