The manufacturing process of the ball screw is complicated, and it takes a lot of processes to be produced. After the production, it needs to go through various testing procedures to finally calculate the finished product. Due to the special nature of the ball screw, although the qualified label has been attached, However, the storage, transportation and installation methods in the later...

There are four main measures for high-strength Round Head Bolt: chemical composition of raw materials, use environment, contact interface control and structural design. Because high-strength ball-end bolts have special requirements for mechanical properties, chemical composition and structural design, it is impossible to achieve corrosion protection of the fasteners by controlling the material...

Instructions for the detection of Round Head Bolt:The detection of round head bolts is divided into two parts: manual and machine. Labor is the most primitive and most commonly used consistent detection method. In order to minimize the outflow of defective products, the general production enterprise personnel shall visually inspect the packaged or shipped products to eliminate defective...

   The ball-and-bolt connection has the advantages of simple construction, good performance, detachability, fatigue resistance, and no looseness under dynamic load. It is a promising connection method. The ball studs are tightened with special wrenches to create a large and controlled pre-tension of the bolts. Through the nuts and pads, the same amount of pre-stress is applied to...

The characteristics of the Round Head Bolt are generally used in the local area where the surface lubrication is not raised after the connection is required, because the countersunk head can be screwed into the part. The round head can also be screwed into the part. The tightening force of the square head can be larger, but the size is large. In order to meet the needs of...

The Round Head Bolt are fixed before the pouring of the caps, and there is no room for adjustment. In order to ensure the accuracy of the upper steel structure, the orientation of the pre-embedded round head bolts is ensured. During the construction operation, the construction is strictly carried out according to the requirements: All operators, understand the drawings, and strictly...

Round Head Bolt, we ship from production to delivery. In this whole process, we all need quality inspection of the ball studs. This will ensure the quality of the ball studs. This will allow customers to use our built-in screws more confidently and boldly. Then, in the process of quality measurement of stainless steel screws and nuts, we generally encounter some bad quality problems! Then...

 During the use of the Round Head Bolt, sometimes there is a breakage. What is the cause of the breakage of the ball studs? Let's talk about it with Xiaobian.  The fracture of the ball stud is mainly caused by long-term fracture caused by time, cracking of U-bolt corrosion caused by harsh environment, and main cause of fracture of hydrogen embrittlement. The quality of the bolt,...